The torque converter is the part of your machine that controls how much fluid is passed on to the transmission. It also allows your engine to continue to run while completely stopped. If this specific component of the machine happens to malfunction, it can cause strange behavior such as slipping. The difficult part is trying to diagnose what the exact cause of the torque converter malfunctioning is. There can be many causes for problems with torque converters.
It can be difficult to separate an issue with the transmission from problems with torque converters. Yet, there are some signs you should be aware of that can help you pinpoint what the issue is, whether that issue be with the transmission or the torque converter. Slipping, overheating, dirty fluid, shuddering, high stall speeds, and strange noises are all signs that point to a non-working torque converter. Most of the time, the torque converter will not be at the root cause of the issue you are facing, so be sure to get your transmission checked out by a professional before jumping to conclusions.
Here is some more information on the signs you should look for when a faulty torque converter is at play:
If you check your temperature gauge and it seems to be overheating, then chances are, your torque converter isn’t working properly. This is the most common symptom of a malfunctioning torque converter, because if the fluid pressure drops, the transmission itself will begin to overheat. However, before you decide that the issue is with the torque converter, make sure that the problem isn’t due to other issues, such as low fluid levels or an issue with solenoid.
2) Gear Slipping
Problems with torque converters tend to show up rather quickly, since the fluid it manages is no longer being managed in a competent fashion. If there isn’t an appropriate amount of fluid being passed on to the transmission, the gears may slip, resulting in a lack of acceleration. If the fuel economy in your machinery drops, inefficient fluid may actually be the source of the issue, rather than a problem with the torque converter, so check your fluids first if any slipping with the transmission occurs.
3) Feels bumpy
When the machinery you are using feels as though it is shuddering, the problem may be the torque converter. Since the shuddering happens randomly, without rhyme or reason, you should get your transmission checked out as soon as you can. Since the shuddering issue occurs at random, you will not want to wait until it reoccurs.
4) Fluid Contamination
Another issue that points to torque converter problems is contamination in the fluid. If, when you check the fluid, you find thick clumps of dark material, either the clutches of the torque converter is damaged, or there is an issue with the transmission. Perform a fluid change before you assume the problem is the torque converter. Then, try and run the machinery for a while, and check back on it later.
5) Slow Engagement
With a ruined torque converter, the transmission will take longer than usual to engage the engine. This slow engagement results in higher stall speeds. Check you engine’s stall speed specifications, then perform a stall speed test based on the specifications listed, in order to diagnose for any torque converter issues.
6) Strange Sounds
Lastly, and perhaps most obviously, are strange or foreign sounds. Weird noises like revving or clicking may indicate a problem with the torque converter.
Using machinery with a bad torque converter is extremely dangerous, and doing so exacerbates the symptoms listed above. Once you have identified that the torque converter is the problem, you will need to get it replaced by professionals. This particular piece of the machinery is delicate and complicated. Therefore, it should not be fixed by the average person. Otherwise, more damage to the equipment could occur.
Luckily, we have a large selection of torque converters for you to choose from that is ready to be immediately dispatched at an affordable rate. If you are currently experiencing torque converter problems, we offer a rapid turnaround on the necessary replacement parts for your equipment.
Contact us today and let us find out how we can serve you!
Mining equipment has been modernized over the last few years, and mining companies must be careful to purchase the right gear and parts for each job. Drillers and excavators are still needed to get the work done, but companies also need hand tools that work in the lowest parts of a mine, the parts to maintain these machines, and the extras that are required to keep the miners safe. Look below at what you need to do to buy the right mining equipment so that your operation runs smoothly.
Read Full Article →
Drilling rigs provide an invaluable service for companies that need to dig deep, with the convergence of drilling rig components and parts working together to do their job.
However, the reality of this situation is that the rigorous work being performed will likely hasten the onset of drilling rig repairs at some point.
Read Full Article →
There are many advantages to using heavy machinery. In the modern world, we are coming to depend more and more on things like heavy duty transmissions and other industrial machinery. Let’s look at some of the top reasons why so many people appreciate this type of technology.
1. Greater Productivity
There is no question that industrial machinery makes many tasks faster and more efficient. The same job that might take days or several people to accomplish can be done in hours or even minutes using the right equipment. Whether they are being used for business or leisure activities, this type of machinery allows you to be far more productive in many ways.
2. Cost Effectiveness
Because they allow you to accomplish so much more in less time, these devices save you money. There is the initial cost of purchasing them and then they must be properly maintained, however, with the right care, they save money in terms of time and labor costs. This helps businesses earn higher profits.
3. LESS PHYSICAL LABOR
Operating heavy machinery is far less taxing on the human body than using other types of tools. Aside from the economic benefits, people with access to this type of machinery don’t have to work as hard physically. This translates into shorter workdays and more leisure time.
4. The ability to accomplish the amazing
One of the reasons we all love heavy duty machines is that they embody the potential to accomplish amazing feats of construction, excavation and demolition that have never before been possible. Manpower has been used to accomplish great feats, including the construction of the Pyramids and the Great Wall of China, but modern technology allows massive undertakings in rapid time.
5. They’re just so cool!
Many people appreciate this type of machinery simply for its power and aesthetic qualities, in addition to the many practical benefits it can add to your life. This is why many people enjoy trade shows that feature such equipment or browsing through magazines, product catalogs or websites that feature it.
The above are some of the top reasons why heavy machinery is so widely admired. It can be advantageous to everyone, from workers to business owners. If you are looking for repair work, or new clutch or transmission parts for your heavy machinery, look no further!
There are a huge number of different transmissions being put to use in a wide variety of simple and complex machinery. Each model uses different types of transmission designs to convert power and drive the engine. With each variety of system comes different abilities and, of course, their own set of unique problems. The most uncommon transmissions are those being put to use in heavy machinery such as hydrostatic transmissions, hydrodynamic systems, and electric transmissions. In each of these cases, the transmission system is essentially converting power from its source for transmission into various gears and components. This transmission mechanism differs accordingly. In virtually all cases, however, the clutch and transmission of a vehicle will be intricately related, controlling the transition between gears which are responsible for transferring power. The number of gears and precise machining necessary for a clutch and transmission to work together properly ends up becoming the source of a great many problems in the engine as a whole. Read Full Article →
The profit losses start mounting as soon as your transmission fails out in the field. When it happens (and it happens to just about everyone), you need transmission replacement and repair parts, and you need them fast.
Read Full Article →