What are the Common Mining Machines that are Used in Mining?

Author Archive

Posts by ThriveAdmin:


What are the Common Mining Machines that are Used in Mining?

Aug 17, 19 • MaintenanceComments Off on What are the Common Mining Machines that are Used in Mining?

Many countries around the world benefit directly from the mining industry. This industry enables the extraction of the resources that can be found on the surface of the Earth, or underneath it. Iron, copper, quartz, cement, coal, gold, silver, natural gas, and petroleum are some of the most common items that the humans mine. The mining industry offers a lot of opportunities to those who wanted to enter the industry. Geologists and mining engineers are the professions that benefit most from the industry, and they study for several years to understand the most common procedures required to mine ores. Mining companies, on the other hand, are investing heavily to purchase the most powerful tools that are used in the field. Over time, the heavy equipment and mining machines used in the industry becomes susceptible to wear and tear. K&L Clutch is a company dedicated to providing the best services to repair heavy equipment that has been subjected to excessive wear and tear.

Read Full Article →

What is the Importance of a Power Take Off?

Jul 20, 19 • Power Take OffsComments Off on What is the Importance of a Power Take Off?

Before we can begin on the importance of a power take off (PTO), you should first understand what it actually is. This is a piece of equipment that transfers the mechanical power of the engine over to another part of the equipment. Trucks have many different parts in them, and some of the things found in a truck aren’t found in a car. One of the things that a car doesn’t have is known as the PTO.

Power Take Off

Read Full Article →

What is the Difference Between a Condenser and a Heat Exchanger

May 25, 19 • Heat ExchangersComments Off on What is the Difference Between a Condenser and a Heat Exchanger

Water-cooled brakes also know as WCB is when the brakes are air actuated and then it is cooled by a constant flow of water from a cooling system with an open or closed loop cooling system. The air tube design does not require any kind of special coating or treatments and it is corrosion resistant as well.

Young Heat Exchanger

Read Full Article →

How Do You Drain a Torque Converter?

May 10, 19 • Torque FluidComments Off on How Do You Drain a Torque Converter?

Step by Step Directions to Drain a Torque Converter.

Since a Torque Converter, (T-Converter) is your transmission’s number one assistant, a well cared for T-Converter makes for a happy transmission. A misbehaving T-Converter can cause transmission slippage, stalling, strange noises and much more serious damage to the vehicle’s transmission. Over time, debris from disintegrating internal moving parts can contaminate the transmission oil and prevent the T-Converter from working effectively, thereby causing transmission damage. Taking the extra step to include a good flush of the T-Converter is a good idea since it is not normally included in a standard transmission oil change. A T-Converter’s purpose is to assist the vehicle’s automatic transmission to perform well and provide a smooth and carefree shifting experience between gears. A flush of the T-Converter can be a quick and easy process, however certain vehicle models can present some challenges. It all depends on the type of connections on the vehicle’s transmission oil connector lines.

Read Full Article →

What Equipment is Needed for Mining?

Apr 23, 19 • Cranes, TransmissionComments Off on What Equipment is Needed for Mining?

 

Mining equipment has been modernized over the last few years, and mining companies must be careful to purchase the right gear and parts for each job. Drillers and excavators are still needed to get the work done, but companies also need hand tools that work in the lowest parts of a mine, the parts to maintain these machines, and the extras that are required to keep the miners safe. Look below at what you need to do to buy the right mining equipment so that your operation runs smoothly.

Read Full Article →

What is a Torque Converter and How Does It Work?

Apr 10, 19 • News, Torque Converters, Torque FluidComments Off on What is a Torque Converter and How Does It Work?

It is worth noting that not long ago, in 1902, the year, the design for the automatic transmission torque converter appeared. Nearly nothing has changed during this time, all the basics and features are included in modern models.

Initially, these converters were installed exclusively on buses. Only a few decades later, manufacturers started to include it in passenger vehicles. And this is not surprising because the part allows you to convert and transfer the moment from the engine to the installed automatic transmission very well. The driver can also change the torque and speed. Initially, this innovation began to be installed on the Ford car. Popularity has increased significantly after a few years.

Read Full Article →

What is the Difference Between Articulating Boom and a Telescopic Boom?

Mar 12, 19 • CranesComments Off on What is the Difference Between Articulating Boom and a Telescopic Boom?

There are two primary types of boom lifts on the market today: articulating and boom. Both are valuable additions to a work site that make it easier to get the job done. However, there are differences between the two types of boom lifts that make them better suited for specific uses. If you’re trying to decide which one is best for your work site, here’s what you need to know.

Articulating Boom Lift

Read Full Article →

Good List to Tell Your Torque Converters needs Servicing for Mining Cranes?

Dec 13, 18 • NewsComments Off on Good List to Tell Your Torque Converters needs Servicing for Mining Cranes?

Signs Your Torque Converter Needs Servicing 

As an operator of heavy equipment, you realize that it is definitely important that all of the tools of your trade continue to function properly for the Highest Return on Investments.

Read Full Article →

How Water Cooled Brakes Work

Jul 19, 18 • Brakes1 Comment

Traditional disk brakes usually experience very high temperatures which can have severely detrimental effects on their performance. To lower these temperatures, the use of fluids such as water is imperative to eliminate much of this friction-generated heat.

Read Full Article →

Drilling Rig Parts and Repairs

Jan 29, 18 • Air Clutches, Air Compressors, Clutches, Industrial Mechanical Parts, Industrial Product Service, News, Torque Converters, TransmissionComments Off on Drilling Rig Parts and Repairs

drilling rig parts repairs by KL Clutch

Drilling rigs provide an invaluable service for companies that need to dig deep, with the convergence of drilling rig components and parts working together to do their job.

However, the reality of this situation is that the rigorous work being performed will likely hasten the onset of drilling rig repairs at some point.
Read Full Article →